Carbon Packaging Machine

Ultra-fine powders often face issues during packaging such as high air content, heavy dust, light weight causing floating, and difficulty in packing due to looseness. This packaging machine completely solves the above problems, addressing challenges like low manual packaging efficiency, poor accuracy, heavy dust, and difficulty in packaging. It is a new-generation device featuring high weighing accuracy and simple operation, widely applicable for packaging ultra-fine powdery materials such as precipitated silica, precipitated white carbon black, thickeners, pigment carbon black, acetylene carbon black, ink carbon black, rubber carbon black, activated carbon black, carbon, calcium stearate, zinc stearate, magnesium stearate, heat stabilizers, calcium-zinc stabilizers, barium-zinc stabilizers, magnesium hydroxide, aluminum hydroxide, powder coatings, carbon black, matting powder, stearates, lithium iron phosphate, aerogel, and other powders.

Product Overview:

The vacuum valve port packaging machine is suitable for valve bag packaging of ultra-fine and nano-scale powders with high air content and low bulk density. The packaging process has no dust leakage, effectively reducing environmental pollution. It achieves high compression ratio filling of materials, making the finished bags compact in appearance, reducing bag size, and delivering outstanding packaging results.

【Typical materials include silicon powder, carbon black, white carbon black, super conductive carbon black, powdered activated carbon, graphite, and hard acid salts, etc.】

Working Principle:

The JKF-159C series packaging machine uses a vacuum suction method for material feeding. The packaging bag is placed in a sealed vacuum chamber, and the material enters the bag through negative pressure attraction, while the gas in the material is discharged through the pores of the bag. When the weight of the material filled into the bag reaches the preset value, the vacuum pump stops, the vacuum chamber door opens, and the operator removes the sealed bag, completing a single bag packaging cycle.

Technical Parameters:

· Weighing range: 1-50kg

· Packaging speed: 1-4 bags/minute (depends on material characteristics and bag type)

· Accuracy: ±0.2～0.4%

· Voltage: AC220V-440V, 50/60Hz, three-phase four-wire (customer must provide local voltage level and frequency)

· Air supply: 0.4-0.8MPa dry compressed air, total air consumption 0.4m³/min