Aluminum Hydroxide Packaging Machine
Vacuum valve bag packing machine for ultrafine powders such as precipitated silica, carbon black, aluminum hydroxide, etc. Features high precision, dust-free operation, and high compression filling, solving packaging difficulties for light and fluffy powders.
Specifications
Product details
Ultrafine powders often have issues like high gas content, excessive dust, light weight causing floating, and difficulty in packing. This packaging machine completely solves these problems, addressing the challenges of manual packing such as low efficiency, poor accuracy, dust pollution, and difficulty in handling. It is a new-generation device with high weighing accuracy and simple operation, widely applicable for packaging ultrafine powder materials, including precipitated silica, precipitated white carbon black, thickeners, pigment carbon black, acetylene carbon black, ink carbon black, rubber carbon black, activated carbon black, carbon, calcium stearate, zinc stearate, magnesium stearate, heat stabilizers, calcium-zinc stabilizers, barium-zinc stabilizers, magnesium hydroxide, aluminum hydroxide, powder coatings, carbon black, matting powder, stearates, lithium iron phosphate, aerogel, and other powders.
Product Overview:
The vacuum valve port packaging machine is suitable for valve bag packaging of ultrafine and nanoscale powders with high gas content and low bulk density. The packaging process has no dust leakage, effectively reducing environmental pollution. It achieves high compression ratio filling, making the finished bags well-shaped and reducing bag size. The packaging effect is particularly outstanding.
Typical materials include silicon powder, carbon black, white carbon black, super conductive carbon black, powdered activated carbon, graphite, and hard acid salts.
Working Principle:
The JKF-159C series packaging machine uses a vacuum suction method to feed materials. The bag is placed in a sealed vacuum chamber, and materials are drawn into the bag by negative pressure. Meanwhile, gas in the material is discharged through the bag pores. When the weight in the bag reaches the preset value, the vacuum pump stops, and the vacuum chamber door opens. The operator removes the sealed bag, completing one cycle.
Technical Parameters:
· Weighing range: 1-50 kg
· Packaging speed: 1-4 bags/min (depending on material characteristics and bag type)
· Measurement accuracy: ±0.2-0.4%
· Applicable voltage: AC220V-440V, 50/60Hz, three-phase four-wire (customer must provide local voltage and frequency)
· Air supply: 0.4-0.8 MPa dry compressed air, total consumption 0.4 m³/min
