Acetylene Carbon Black Packing Machine

Ultrafine powders often present challenges during packaging, such as high gas content, excessive dust, light specific gravity causing floating, and difficulty in packing fluffy materials. This packing machine completely resolves these issues, overcoming problems like low efficiency, poor accuracy, high dust, and difficult handling in manual packaging. It represents a new era of equipment with high weighing accuracy and simple operation, widely applicable for packaging ultrafine powdery materials, including precipitated silica, precipitated white carbon black, thickeners, pigment carbon black, acetylene carbon black, ink carbon black, rubber carbon black, activated carbon black, carbon, calcium stearate, zinc stearate, magnesium stearate, heat stabilizers, calcium-zinc stabilizers, barium-zinc stabilizers, magnesium hydroxide, aluminum hydroxide, powder coatings, carbon black, matting powder, stearates, lithium iron phosphate, aerogel, etc.

Product Overview:

The vacuum valve port packing machine is designed for valve bag packaging of ultrafine and nano powders with high gas content and low specific gravity. The packaging process is dust-free, effectively reducing environmental pollution. It achieves high compression ratio filling, making the finished bags compact and reducing bag size, with outstanding packaging results.

Typical materials include silicon powder, carbon black, white carbon black, super conductive carbon black, powdered activated carbon, graphite, and hard stearates.

Working Principle:

The JKF-159C series packing machine uses vacuum suction to feed materials. The bag is placed in a sealed vacuum chamber. Material enters the bag via negative pressure suction, while gases in the material are expelled through the bag's pores. When the material weight in the bag reaches the preset value, the vacuum pump stops, the chamber door opens, and the operator removes the sealed bag, completing a single bag packaging cycle.

Technical Parameters:

· Weighing range: 1-50kg

· Packaging speed: 1-4 bags/min (depends on material characteristics and bag type)

· Measurement accuracy: ±0.2-0.4%

· Applicable voltage: AC220V-440V 50/60Hz three-phase four-wire (customer must provide local voltage and frequency)

· Air supply: 0.4-0.8MPa dry compressed air, total air consumption 0.4m³/min