Calcium-Zinc Stabilizer Packaging Machine

Ultra-fine powders face issues such as high air content, heavy dust, low specific gravity causing floating, and difficulty in compact packaging. This packaging machine completely solves the above problems and addresses the challenges of manual packaging, such as low efficiency, poor accuracy, heavy dust, and difficult handling. It is a new-generation device featuring high weighing accuracy and simple operation, widely applicable for packaging ultra-fine powder materials, including precipitated silica, precipitated white carbon black, thickeners, pigment carbon black, acetylene black, ink carbon black, rubber carbon black, activated carbon black, carbon materials, calcium stearate, zinc stearate, magnesium stearate, heat stabilizers, calcium-zinc stabilizers, barium-zinc stabilizers, magnesium hydroxide, aluminum hydroxide, powder coatings, carbon black, matting powder, stearates, lithium iron phosphate, aerogel, etc.

Product Overview:

The vacuum valve port packaging machine is suitable for valve bag packaging of ultra-fine and nano powders with high air content and low specific gravity. The packaging process is dust-free, effectively reducing environmental pollution. It achieves high compression ratio filling, making the finished bags full and compact, reducing bag size, with outstanding packaging results.

【Typical materials include silicon powder, carbon black, white carbon black, super conductive carbon black, powdered activated carbon, graphite, and hard acid salts】

Working Principle:

The JKF-159C series packaging machine uses vacuum suction to feed materials. The packaging bag is placed in a sealed vacuum chamber. Materials enter the bag through negative pressure suction, while air in the materials is expelled through the bag's pores. When the weight of materials in the bag reaches the preset value, the vacuum pump stops, the vacuum chamber door opens, and the operator manually removes the sealed bag, completing a single bag packaging.

Technical Parameters:

· Weighing range: 1-50 kg

· Packaging speed: 1-4 bags/min (depends on material characteristics and bag type)

· Measurement accuracy: ±0.2-0.4%

· Power supply: AC220V-440V, 50/60Hz, three-phase four-wire (customer should provide local voltage and frequency)

· Air supply: 0.4-0.8 MPa dry compressed air, total air consumption 0.4 m³/min